- NO.1 What does Abellstar Diaper Sensor help?
Abellstar Diaper Sensor helps to report information of the babies and kids, including Pee Events, Diaper Usage, the babies’ Location,connecting more Diaper Sensors. And it will remind parents to change the diapers when it’s full, or alerts when the babies and kids are too far away from your smart phone.
To make baby caring easier, try to get an Abellstar Diaper Sensor.
- NO.2 How to get the Abellstar App
Go to App Store and search “Abellstar”, install Abellstar app.
- NO.3 How to add a new Diaper Sensor
In ‘Device’ page, which is the Home page of Abellstar App, there are two way to add a new Diaper Sensor. Make sure the Diaper Sensor is ON before adding new devices.
Scan device’s signal: Press ‘Add Devices’, Abellstar app will scan bluetooth signal around the smart phone. The Diaper Sensors near by will be listed in the radar page, select your sensor.
Scan QR Code: On every package of the Diaper Sensor, there is a unique QR Code. Scan this QR Code, the Diaper Sensor will be added to the device list.
- NO.4 How to know which Diaper Sensor is in the hand,when you are adding a new device
Press ‘Add Devices’,Abellstar app will scan bluetooth signal around the smart phone. And you can click the Diaper Sensor button which is in the hand,you can see one device color on the smart phone is not the same as others.
- NO.5 How to mount the Diaper Sensor onto the Diaper
① Insert the Diaper Sensor into the Diaper Band, when it’s done, it looks like that shown in figure 4.1；②Turn on the sensor；③Stick the Diaper Band onto the OUTER surface of the diaper, adjusting the sensing window of the Diaper Sensor as close as to the Pee Position of the baby. Please make sure it is mounted onto the OUTER surface of the diaper. ④Open Abellstar App in your smart phone, and you will get real time information of your baby’s diaper.
- NO.6 Why the Diaper Sensor is not connected
First of all, please make sure you are using smart phone with Android version 4.3 or above, apple device with IOS7.0 or above, which support Bluetooth V4.0.
If your Diaper Sensor is not connected automatically, please check below:
I. Make sure the sensor is turned on\nPress the power button of the sensor, you will see the led on the right blink in orange.
II. Make sure the bluetooth of your phone is turned on
III. The sensor is not connected to the other phone
To check this, go to Page Devices,‘add devices’, scan the device signal. If the sensor is on but not found by your phone, it is probably connected by other phones.
To fix this, reboot your Diaper Sensor, and ‘add devices’ to scan again.
If the sensor is still not found, try to reboot your smart phone and try again. Because we know bluetooth connection is not very stable in some android phone.
At the moment when the Diaper Sensor is connected，the led on the right will flash once in orange.
- NO.7 Sometimes the sensor do not remind me to change the diaper
Maybe the sensor is not mounted on the right position.Please try to put the sensing window of the Diaper Sensor to the Pee Position of the baby.
Maybe the reminding usage level is set to a too high level.Try to lower the reminding level.
And if the reminding level set to 0, it will remind you every time the baby pee, event the diaper is not full.
- NO.8 How do I know the Diaper Sensor is working
Single click on the power button of the Diaper Sensor, if the led on the right flash once in orange, it means the sensor is working. If the led gives no respond, it means the sensor is off.
To turn on the Diaper Sensor, long press the power button till the led in orange on the right is on.
To turn off the Diaper Sensor, long press the power button till the led in red on the left blinks.
- NO.9 How to enable the Anti-lost function
① Make sure the sensor is connected
② Get into the Location Page
③ Press the ON/OFF button on the right
④ Set the monitoring range
When the sensor is out of the monitoring range, it will pops up a warning.
- NO.10 To share the Diaper Sensor to other people - Device Authorization
For some reason, sometimes you need to leave your baby to a nanny, or your husband, or your wife. They also need help from Abellstar Diaper Sensor.
Authorize and share the sensor to them in this way:
With your phone, go to authorization page and create an AUTH QR Code.
With the phone of the nanny, or your husband, or your wife, use ‘scan QR Code’ to add the sensor to the AUTH Device List.
- NO.11 When shall I change the battery?
The battery of Abellstar Diaper Sensor is CR2025(3V). The battery life is about 30 days. You can check the power status in Page Device Information:
- NO.12 Abellstar Diaper Sensor can be upgrade over the air
Though you got the Diaper Sensor long time ago from Abellstar team and use it every day at home. But additional features of the sensor are still under development by Abellstar team. When a new feature is ready, Abellstar team will release the new Firmware version.
You can upgrade the Diaper Sensor by yourself at home:
- NO.13 Please let us know if you have questions or suggestions
Any other questions or suggestion for us? Please send us message and we will contact you as soon as possible. (Please check the system messages in your message box for our replies.)